How to Set Up and Use Your J-axis Cybeat Watch
If you are looking for a stylish and functional digital watch, you might want to consider the J-axis Cybeat watch. This watch features a sleek design, a large LCD display, a stopwatch, an alarm, a calendar, and a backlight. But how do you set up and use your J-axis Cybeat watch? Here is a simple guide to help you get started.
How to Set the Time and Date on Your J-axis Cybeat Watch
Setting the time and date on your J-axis Cybeat watch is easy. Just follow these steps:
J-axis Cybeat Watch Manual
Press and hold the SET button on the left side of the watch for three seconds. The hour digits will start to flash.
Press the MODE button on the right side of the watch to adjust the hour. Press and hold the MODE button to change the hour faster.
Press the SET button again to move to the minutes. Repeat the same process to adjust the minutes.
Press the SET button again to move to the seconds. Repeat the same process to reset the seconds to zero.
Press the SET button again to move to the year. Repeat the same process to adjust the year.
Press the SET button again to move to the month. Repeat the same process to adjust the month.
Press the SET button again to move to the day. Repeat the same process to adjust the day.
Press the SET button again to exit the time and date setting mode.
How to Use the Stopwatch on Your J-axis Cybeat Watch
Your J-axis Cybeat watch has a stopwatch function that can measure up to 23 hours, 59 minutes, and 59 seconds. Here is how to use it:
Press the MODE button until you see ST on the display. This indicates that you are in stopwatch mode.
Press the START/STOP button on the right side of the watch to start or stop the stopwatch.
Press the LAP/RESET button on the left side of the watch to record a lap time or reset the stopwatch.
To exit stopwatch mode, press and hold the MODE button for three seconds.
How to Set and Use the Alarm on Your J-axis Cybeat Watch
Your J-axis Cybeat watch has an alarm function that can be set for any time of day. Here is how to set and use it:
Press the MODE button until you see AL on the display. This indicates that you are in alarm mode.
Press and hold the SET button for three seconds. The hour digits will start to flash.
Press the MODE button to adjust the hour. Press and hold the MODE button to change
the hour faster.
Press
the SET button again
to move
to
the minutes.
Repeat
the same
process
to adjust
the minutes.
Press
the SET button again
to exit
the alarm setting mode.
To turn
the alarm on or off,
press
the START/STOP button.
You will see
a bell icon on
the display when
the alarm is on.
To stop
the alarm when
it rings,
press any button.
To exit alarm mode,
press and hold
the MODE button for three seconds.
How
to Use
the Backlight on Your J-axis Cybeat Watch
Your J-axis Cybeat watch has a backlight function that can illuminate
the display for easy viewing in low-light conditions. Here is how
to use it:To turn on
the backlight,
press
the LIGHT button on
the left side of
the watch.
The backlight will stay on for three seconds and then turn off automatically.
To turn off
the backlight manually,
press
the LIGHT button again.
Conclusion
The J-axis Cybeat watch is a great accessory for anyone who wants a digital watch that is stylish, functional, and easy 0efd9a6b88
https://www.yinovate.com/forum/the-success-forum/dead-or-alive-3-pc-game-free-download-full-version